Analytical studies of soliton pulses along two-dimensional coupled nonlinear transmission lines

A nonlinear network with many coupled nonlinear LC dispersive transmission lines is considered, each line of the network containing a finite number of cells. In the semi-discrete limit, we apply the reductive perturbation method and show that the wave propagation along the network is governed by a two-dimensional nonlinear partial differential equation (2-D NPDE) of Schrödinger type. Two regimes of wave propagation, the high-frequency and the low-frequency are detected. By the means of exact soliton solution of the 2-D NPDE, we investigate analytically the soliton pulse propagation in the network. Our results show that the network under consideration supports the propagation of kink and dark solitons.     

The study of wave motion in the Talbot interferometer with a lens

We present the study of the wave motion in the Talbot interferometer with an additional element such as a lens for all related audiences. Our solutions are in the analytic form. A general principle of the Talbot effect, which is the optical near-field effect, is the Fresnel diffraction. The Fresnel integral is rather complicated. We therefore introduce an alternative method which is based on the wave propagation through the transmission functions of the grating and the lens. Our method has been proved by a simple experimental setup.     

Evaluation method for heat transfer coefficient of a contact interface across a microscale thin liquid polymer film

The research presented here evaluates the heat transfer coefficient of the contact interface of a thin liquid polymer film between a pair of columnar aluminum bodies with an initial temperature difference of approximately 160 K. We measured the unsteady temperature changes inside the columns. The heat transfer test was performed with three types of liquid polymers: squalane, oleic acid, and silicone oil. The heat transfer coefficient of the polymer films as a fitting parameter was obtained by ensuring the numerically computed time evolution of the columns’ temperature corresponded with the experimentally measured data. The interfacial heat transfer coefficients of the thin polymer films (mean thickness: 60 μm) for all three polymers used were 1.75 kW/m²·K, 2.75 kW/m²·K, and 4.10 kW/m²·K. The present estimating method for determining interfacial heat transfer coefficients was suitable for a material-polymer film-material contact model. The time evolution of the temperature at the contact surfaces was also effectively evaluated using the numerical simulation.     

Two-dimensional optical coherence tomography for real-time structural dynamical characterization

We present a two-dimensional optical coherence vibration tomography (2DOCVT) system with an ultra-precision displacement resolution of ~0.1 nm that is capable of in site real-time absolute displacement measurement of structural line vibrations. Experimental results of sinusoidal, sweep and impulse vibrations were reported. The key figures of merit such as the 2DOCVT system could obtain fast line vibration measurement without scanning and it also could be used to capture structural modal parameters in one single impulse excitation measurement without any vibration excitation input information, making it attractive for the application in low-frequency vibration measurement and response-only modal analysis.     

区域小微企业群体大规模客户化制造系统模块化组建研究

为提升组建效率,降低组建难度与成本,在分析区域小微企业及其群体特点的基础上,提出由小微企业构建产品制造模块,通过模块的组合,形成大规模客户化制造系统的模块化组建方法.同时,结合对产品制造模块及其构建方式,以及模块选择主要影响因素的分析,研究了基于模块选择系数的制造模块选择策略,为制造系统的模块化组建提供了必要条件.     

TiO2 photocatalysis for the degradation of pollutants in gas phase: From morphological design to plasmonic enhancement

TiO₂-based photocatalysis has become a viable technology in various application fields such as (waste)water purification, photovoltaics/artificial photosynthesis, environmentally friendly organic synthesis and remediation of air pollution. Because of the increasing impact of bad air quality worldwide, this review focuses on the use and optimization of TiO₂-based photocatalysts for gas phase applications. Over the past years various specific aspects of TiO₂ photocatalysis have been reviewed individually. The intent of this review is to offer a broad tutorial on (recent) trends in TiO₂ photocatalyst modification for the intensification of photocatalytic air treatment. After briefly introducing the fundamentals of photocatalysis, TiO₂ photocatalyst modification is discussed both on a morphological and an electronic level from the perspective of gas phase applications. The main focus is laid on recent developments, but also possible opportunities to the field. This review is intended as a solid introduction for researchers new to the field, as well as a summarizing update for established investigators.     

CuFe2O4 magnetic heterogeneous nanocatalyst: Low power sonochemical-coprecipitation preparation and applications in synthesis of 4H-chromene-3-carbonitrile scaffolds

The paper presents the synthesis and catalytic activity of CuFe₂O₄ nanoparticles. The CuFe₂O₄ nanoparticles have been prepared by sonochemical route under low power ultrasonic irradiation (UI) and using silent stirring at room temperature only (ST) along with co-precipitation method, without using any additive/capping agent. The synthesized magnetic nanoparticles were successfully used and compared for the synthesis of 4H-chromene-3-carbonitrile derivatives. The CuFe₂O₄ nanoparticles obtained by sonochemical route exhibit higher catalytic activity because of small size (0.5–5 nm), high surface area (214.55 m²/g), high thermal stability up to 700 °C, recyclability and reusability due to its magnetic characteristics than CuFe₂O₄ nanoparticles obtained by room temperature silent stirring. The synthesized CuFe₂O₄ nanoparticles were characterized by FT-IR, SEM–EDX, HR-TEM, XRD, TGA/DTA/DTG, BET, VSM techniques. The present method is of great interest due to its salient features such as environmentally compatible, efficient, short reaction time, chemoselectivity, high yield, cheap, moisture insensitive, green and recyclable catalyst which make it sustainable protocol.